One Piece at a Time

 

Ok, so building all of the different angles for a character shaped like a cylinder with a head shaped like a sphere is not that easy.  It took about 6 or 7 hours to work all the kinks out.  But building all the different angles for a character that is shaped like a person is proving to be exceedingly more challenging.

Above you have the pelvis of the Soft Ninja.  Yes, just the pelvis.  Give me a break.

Being able to draw a good character is hard enough by itself.  Being able to draw that same character from hundreds of different angles in hundreds of different every day poses - not to mention the not so every day poses that actually make animations funny - is a completely different task.  You don't just want your character to look recognizable.  You want your character to have "character."  The hands need to look just right.  The way the elbow meets the forearm and bicep need to be just right.  And before you know it a thirty minute task is taking two weeks.

 

So here is the pelvis with belt and belt buckle.  I'm embarrassed to say that just adding the belt and buckle took an hour and when I was done I realized it needed tweaking.

Now the method I'm using for a relatively smooth turn is the same as I described in the last post.  I have 12 different positions for the pelvis: Front, 4/5 Left, 3/4 Left, 2/3 Left, Profile Left, 1/3 Left, 1/4 Left, 1/5 Left Back and repeat for the right side.

Now the issue I've discovered with this method is that a real person can turn their leg slightly askew without turning their whole body.  So I will have to have more than just 12 different angles.  For example, if I had a ballerina facing front with her feet in first position (heels touching with toes pointing away from each other on a line) her pelvis would be a Front while her right leg would be Profile Right and her left at Profile Left.  So for each pelvis position I'll have to have five or six different positions for each leg.  The same is true for the arms and outrageously true for hands.  

I've got to stop thinking about this or I'll never finish it. I'm just going to make what I think is necessary and then add new positions as I need them.

Head Turn 2.0

 

There are some issues with this video still, but by and large I think this is a much better head turn.

Issue #1:  Every other rotation it skips the back of the head.  This was just an error of my cut and paste.  It's an easy fix.

Issue #2:  There is a slight up and down bump in the rotation.  I know the reason for this, but I am not sure I will fix it.  It may require starting all over and since the South Park style Soft Ninja is just a learning tool for me, I really don't feel the need to do that.

What happened is this; whenever you create an object it has a center.  The center is the center of the screen no matter where you actually create your object.  So if I create my object a little off center and never fix that then every rotation of that object will be off center. 

These are all of the faces of the South Park Soft Ninja spread out for stylistic viewing.  In the program they are all stacked on top of each other with only the one I need at that moment visible.  Because his head is round and he's wearing a mask that conceals any hair or ears, I only need one back.  Otherwise there would be as many back facing heads as front.

Of those 12 heads I only had to make 7 (6 really).  5 are mirror images and the back is simply the front without eyes.  However, because my main head's center is slightly off center every time I flipped the head it was out of place.  Thus I had to reposition all of the left heads manually.  This is where that bumpiness comes from.  I fixed it as well as I could without redoing the left heads (which - as previously stated - I'm not about to do).

Anyway, this rotation is much smoother and should allow for a cleaner animation.  Now I just need to do 16 body positions and reinsert SP Soft Ninja into my animation.  Jeez, this is a lot of work for a learning exercise.

Head Turn Trouble

Ok there are several issues with this video; the head turn, the body turn, the way it moves too quickly from standing at the side of the house to walking toward the tree... But the worst I think is the switch from the front view face to the 3/4 view face and back.  Second is the switch from front view body to profile body, though I think that can potentially be smoothed out by a position adjustment.  And the issue of the way the Soft Ninja moves too quickly from the side of the house to the tree, is a pretty easy fix.

So, my biggest concern is the switch from the front view of the face to the 3/4 view of the face.  There has to be a way to make this switch smoother.  It may require an in between layer - a 5/6 view, if you will - or it may require some deformation of the front and 3/4 view to merge them both.  I'll have to see if any tutorials exist on this issue and what the prevailing wisdom is.  And then I'll have to decide which is easiest.

BTW: in case you are wondering if I'll ever actually get to animating the real Soft Ninja I can only say, I hope so.

Comments welcome.

Scene

This is the scene for the first SP Soft Ninja.  I know it has been a while since I posted, but it really didn't take me that long to create this scene.  Everything but the tree and leaves are extremely geometric.  I felt like the leaves in this scene moved too slowly, so I redid them below.

This looks better to me.  Agree? Disagree?